ITSx chimera bugfix
A user informed me of unexpected behavior regarding potentially chimeric sequences in ITSx, and indeed it turned out to contain a bug that over-reported potential chimeras. This bug is totally unrelated to the new version released this week, and exists in all prior ITSx versions. I strongly encourage everyone to update to ITSx 1.0.6.
I would also like to underscore that ITSx is not a chimera-checker. It detects when sequences look unusual, but all such cases should be further investigated. If you follow this practice, you will see that in some cases ITSx might have over-reported chimeras, and in some instances it will have been correct in its suspicions (and thereby you would be largely unaffected by this bug).
ITSx updated to version 1.0.5
I am on a roll pushing out new software these days, an here’s the latest addition. This version of ITSx was finished up last month and seems to be stable enough for consumption by the users. Version 1.0.5 adds a new option: “
--anchor” which enables extraction of regions flanking the ITS sequences (and the 5.8S, LSU and SSU, if desired). The option allows for extraction of a number of bases at each end, e.g. “
--anchor 30” to get 30 bp before and after each ITS region, or all bases matching the corresponding HMM, by specifying “
--anchor HMM“. The update can be downloaded here.
An update on ITSx and HMMER 3.1
An ITSx user yesterday made me aware of an information-problem (thanks Suzanne!) regarding the use of ITSx in combination with the HMMER 3.1 beta. I have not been entirely clear on why you might get the “Error: bad format, binary auxfiles, (…) binary auxfiles are in an outdated HMMER format (3/b); please hmmpress your HMM file again” error message when running ITSx with HMMER 3.1 installed. You might think that following the instructions for Metaxa might do the trick. As you will notice, however, it will not. Instead you will be presented with the following error message: “Error: Failed to open binary auxfiles”. This is because while Metaxa 1.1.2 will re-create the HMM-files if needed, ITSx does not. Instead, ITSx has the option
"--reset T" which can be added to the command line to recreate the HMM-files for the current HMMER version installed (regardless of which 3.x version).
Thus, the solution for the “bad format, binary auxfiles” error is to simply add
"--reset T" (without quotes) to the ITSx command line and run the software again. You only need to do this once, unless you update HMMER and/or get the same error message again for some other reason. The Metaxa-post has been updated to clarify this as well.
ITSx moved out of beta
As promised yesterday, I have now uploaded an update to ITSx, bringing it to version 1.0.2. So what’s new in this version?
First of all, ITSx is now taken out of beta and is now considered ready for production use. We do no longer find any bugs in it, and since there’s now a wide range of people already using it for various purposes, we feel confident that any significant bugs would have been unraveled by now.
Secondly, I have also added support for the new HMMER version (3.1b) released in May in this version of ITSx. So you can now go ahead and install HMMER 3.1 if you want to try out the new HMMER beta and still be able to use ITSx.
Finally, we have also updated the manual somewhat, hopefully making it a little easier to use ITSx for a first-time user.
Version 1.0.2 of ITSx can be downloaded from here. As previously, you may still report any bugs, strange behaviors, ideas for new features, or inconsistencies with certain lineages, by mailing to “itsx” at this domain name.
Metaxa and HMMER 3.1b
As you might be aware, a new version of HMMER is out since late May. You might wonder how Metaxa (relying on HMMER3) will work if you update to the new version of HMMER, and I have finally got around to test it! The answer, according to my somewhat limited testing, is that Metaxa 1.1.2 seems to be working fine with HMMER 3.1.
You might need to go into the database directory (“metaxa_db”; should be located in the same directory as the Metaxa binaries), and remove all the files ending with suffixes .h3f .h3i .h3m and .h3p inside the “HMMs” directory. On most installation, this should not be necessary. Myself, I just plugged HMMER 3.1 in and started Metaxa, but if you get error messages complaining that “Error: bad format, binary auxfiles,
binary auxfiles are in an outdated HMMER format (3/b); please hmmpress your HMM file again”, then you should try removing the files and re-running Metaxa. This might especially be a problem on older Metaxa versions. [Update: Note that this fix will likely not work with ITSx!]
Bear in mind that I have not run thorough testing on Metaxa and HMMER 3.1, and probably won’t for the 1.1.2 version, since there’s a 2.0 version waiting just around the corner…
Additionally, if you experience problems with Megraft, you should try the same fix as for Metaxa, but with the Megraft database directory instead. Regarding ITSx, a minor update will be released very soon, which also will address HMMER 3.1b compatibility. [Update: See this post for how to work around HMMER 3.1 problems with ITSx.]
Happy barcoding everyone!
ITSx – a software tool for detection and extraction of ITS1 and ITS2 sequences
For a couple of years, I have been working with microbial ecology and diversity, and how such features can be assessed using molecular barcodes, such as the SSU (16S/18S) rRNA sequence (the Metaxa and Megraft packages). However, I have also been aiming at the ITS region, and how that can be used in barcoding (see e.g. the guidelines we published last year). It is therefore a great pleasure to introduce my next gem for community analysis; a software tool for detection and extraction of the ITS1 and ITS2 regions of ITS sequences from environmental communities. The tool is dubbed ITSx, and supersedes the more specific fungal ITS extractor written by Henrik Nilsson and colleagues. Henrik is once more the mastermind behind this completely rewritten version, in which I have done the lion’s share of the programming. Among the new features in ITSx are:
- Robust support for the Cantharellus, Craterellus, and Tulasnella genera of fungi
- Support for nineteen additional eukaryotic groups on top of the already present support for fungi (specifically these groups: Tracheophyta (vascular plants), Bryophyta (bryophytes), Marchantiophyta (liverworts), Chlorophyta (green algae), Rhodophyta (red algae), Phaeophyceae (brown algae), Metazoa (metazoans), Oomycota (oomycetes), Alveolata (alveolates), Amoebozoa (amoebozoans), Euglenozoa, Rhizaria, Bacillariophyta (diatoms), Eustigmatophyceae (eustigmatophytes), Raphidophyceae (raphidophytes), Synurophyceae (synurids), Haptophyceae (haptophytes) , Apusozoa, and Parabasalia (parabasalids))
- Multi-processor support
- Extensive output options
- Virtually zero false-positive extractions
ITSx is today moved from a private pre-release state to a public beta state. No code changes has been made since February, indicative of that the last pre-release candidate is now ready to fly on its own. As far as our testing has revealed, this version seems to be bug free. In reality though, researchers tend to find the most unexpected usage scenarios. So please, if you find any unexpected behavior in this version of ITSx, send me an e-mail and make us aware of the potential shortcomings of our software.
We expect this open-source software to boost research in microbial ecology based on barcoding of the ITS region, and hope that the research community will evaluate its performance also among the eukaryote groups that we have less experience with.